Horizontal Pumping System


    Pompa HPS sudah terbukti sangat efektif dalam meningkatkan efisiensi biaya peralatan serta perawatan merupakan cara yang handal pada aplikasi injeksi air produksi.

    PT. Epsindo Jaya Pratama telah memproduksi HPS dari flow rate tekanan yang rendah hingga tinggi, dengan menggunakan material berkualitas tinggi untuk menyesuaikan dan memudahkan dalam perakitan dan pemasangan di lapangan.

    Dengan keunggulannya maka, pengaplikasian sistem HPS menjadi alternatif yang popular untuk menggantikan pompa piston, pompa sentrifugal atau pompa turbin yang selama ini digunakan.

    Aplikasi Horizontal Pumping System diantaranya:

    • Sumur injeksi air terproduksi
    • Pembuangan air limbah
    • Pipeline Booster
    • Crude Oil Transfer
    • Condensate Transfer
    • Jets Pumps
    • Fluid Pump for downhole

    Horizontal Pumping System Option:

    • Sistem Penggerak: Electric, Gas or Diesel
    • Electric starting options: Across the line / D.O.L
    • Solid state reduced voltage
    • Speed Control: Electric Variable Speed Drive (VSD)
    • Suction Pressure: 0 to 1500 psi (class 150 to 900 flange raiting)
    • Discharge Pressure: 0 to 5000 psi (class 150 to 2500 flange raiting)
    • Mechanical seals: Component or cartridge seals
    • Emergency shutdown devices: Low suction pressure, High Vibration
    • Flow meter: Turbine, Mass (corriolis)

    Features:

    • Modular Design Concept
    • Minimal Routine Maintenance Requirement
    • Ease of Repair and Replacement of Component
    • Single Low-Pressure Mechanical Seal
    • Short Lead-times
    • No gear reducers, V-belt or other associated equipment to maintain
    • Low noiseanf vibration levels
    • No pulsation

    Benefit:

    • High Pump Availability (minimal down time)
    • Low Initial and Whole Life Cost
    • Capable of operating unattended for extended periods
    • Adaptable for changing duty condition with minimal investment
    • Low environmental impact
    Pump Series Housing Diameter (Inch) Housing Presure limit (psi) Power Limit BEP Efficiency (%) Flow Range (BFPD) Standard Flange Diameter (inch)
    Suction Discharge
    IND 4.00 5000 200 59 250-3000 4 2
    ING 5.13 5000 600 62 1000-7500 4 2
    INF 5.38 5000 600 69 2000-9000 4 3
    INH 5.62 3000 1000 66 5000-20000 4 3
    INJ 6.75 3000 1000 79 6000-22500 4/6 3/4
    INM 8.62 2400 1500 77 8000-30000 6 4
     
         
         
     

     

    If you have further question or inquiry about our product, please do not hesitate to contact us by

    Telephone :
    (62-21) 45859124/25
    Facsimile : 
    (62-21) 45859123

    or using contact form here


     

     
    Copyright © Epsindo Jaya Pratama rights reserved | Developed by Evolutionteams.com